Rain Water Pipe Diverter Kit Water Butt Saver Fits Square and Round Pipes
This water butt stand fits 200ltr Barrel Water Butt. Made from recycled plastic with a 5 year guarantee.KIT INCLUDES: 1 x Rain Diverter, 1 x 20mm Connector, 1 x Washer, 1 x Nut, 1 x 500mm HoseCollect the water that falls on your house roof, shed or greenhouse automatically from your rain down pipe.Fits standard 68mm round or 65mm square plastic down pipes (not suitable for cast iron down pipes).BEWARE Do not use an electric drill if the Butt contains any water.Fitting Instructions:1) Take the lid off the water butt. If your water butt is not predrilled then you will need to drill a 25mm hole to fit the rain diverter.2) Drill a 25mm hole near the top of the water butt on the side closest to the down pipe (some water butts may have drill points indicated). Push connector through the washer from inside the butt, then fit and tighten the nut on the outside to form a seal.3) Position water butt with tap facing forward and adjust to down pipe. If using a stand place the butt on it. Mark the down pipe 10mm below the top of the butt. Mark again 30mm below this point, using a hacksaw. Cut out this section.4) Fit rain diverter with square end up into the cut section of the down pipe. Release any clips supporting the down pipe in order to insert the rain diverter body and refit once diverter is in place.5) Connect hose between rain rain diverter body and the water but connector.FINAL NOTEIf correctly fitted, the butt will fill to within 10mm of the top. If water butt overflows - raise the butt. If water level is too low - lower the butt. If the water level is too low ensure rain has fallen to fill the butt before lowering.KIT INCLUDES:1 x Rain Diverter1 x 20mm Connector1 x Washer1 x Nut1 x 500mm Hose.
Price now:
From
£11.99
To
£14.75
Price History:
Details:Rain Water Pipe Diverter Kit Water Butt Saver Fits Square and Round Pipes
This water butt stand fits 200ltr Barrel Water Butt. Made from recycled plastic with a 5 year guarantee.KIT INCLUDES: 1 x Rain Diverter, 1 x 20mm Connector, 1 x Washer, 1 x Nut, 1 x 500mm HoseCollect the water that falls on your house roof, shed or greenhouse automatically from your rain down pipe.Fits standard 68mm round or 65mm square plastic down pipes (not suitable for cast iron down pipes).BEWARE Do not use an electric drill if the Butt contains any water.Fitting Instructions:1) Take the lid off the water butt. If your water butt is not predrilled then you will need to drill a 25mm hole to fit the rain diverter.2) Drill a 25mm hole near the top of the water butt on the side closest to the down pipe (some water butts may have drill points indicated). Push connector through the washer from inside the butt, then fit and tighten the nut on the outside to form a seal.3) Position water butt with tap facing forward and adjust to down pipe. If using a stand place the butt on it. Mark the down pipe 10mm below the top of the butt. Mark again 30mm below this point, using a hacksaw. Cut out this section.4) Fit rain diverter with square end up into the cut section of the down pipe. Release any clips supporting the down pipe in order to insert the rain diverter body and refit once diverter is in place.5) Connect hose between rain rain diverter body and the water but connector.FINAL NOTEIf correctly fitted, the butt will fill to within 10mm of the top. If water butt overflows - raise the butt. If water level is too low - lower the butt. If the water level is too low ensure rain has fallen to fill the butt before lowering.KIT INCLUDES:1 x Rain Diverter1 x 20mm Connector1 x Washer1 x Nut1 x 500mm Hose.
Price now:
From
£11.99
To
£14.75
This site contains affiliate links for which we may be compensated.
Gardening Naturally UK | £11.99£5.49 Delivery | Store |
New | £13.84Free Delivery | Store |
New | £14.22Free Delivery | Store |
New | £14.75Free Delivery | Store |
Product Description
This water butt stand fits 200ltr Barrel Water Butt. Made from recycled plastic with a 5 year guarantee.KIT INCLUDES: 1 x Rain Diverter, 1 x 20mm Connector, 1 x Washer, 1 x Nut, 1 x 500mm HoseCollect the water that falls on your house roof, shed or greenhouse automatically from your rain down pipe.Fits standard 68mm round or 65mm square plastic down pipes (not suitable for cast iron down pipes).BEWARE Do not use an electric drill if the Butt contains any water.Fitting Instructions:1) Take the lid off the water butt. If your water butt is not predrilled then you will need to drill a 25mm hole to fit the rain diverter.2) Drill a 25mm hole near the top of the water butt on the side closest to the down pipe (some water butts may have drill points indicated). Push connector through the washer from inside the butt, then fit and tighten the nut on the outside to form a seal.3) Position water butt with tap facing forward and adjust to down pipe. If using a stand place the butt on it. Mark the down pipe 10mm below the top of the butt. Mark again 30mm below this point, using a hacksaw. Cut out this section.4) Fit rain diverter with square end up into the cut section of the down pipe. Release any clips supporting the down pipe in order to insert the rain diverter body and refit once diverter is in place.5) Connect hose between rain rain diverter body and the water but connector.FINAL NOTEIf correctly fitted, the butt will fill to within 10mm of the top. If water butt overflows - raise the butt. If water level is too low - lower the butt. If the water level is too low ensure rain has fallen to fill the butt before lowering.KIT INCLUDES:1 x Rain Diverter1 x 20mm Connector1 x Washer1 x Nut1 x 500mm Hose.
Product Specifications
General | |
|---|---|
Material | plastic/cast iron |
Size | 1 |
Brand | Garland |
type | stax |
colour | black |
number in pack | 1 |
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgement, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalised items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.